3com router help

[Bifocs]

[NFC]

If you use the "Global Reverse DCC" function, you don't have to modify the configuration of your router.
If you don't want to use it, then you'll have to forward the port range configured in mirc (Alt-O > DCC > Options)

[Bifocs]

Cheers for the advice but i have 2 more questions, 1, where can i find the global reverse dcc function and 2 if that fails what sorta number do i need to put in the port range.

Sorry if this is easy stuff but i only learn more as i get stuck.

Thanks Very Much

Gav_esp@yahoo.com

[Riamus]

Reverse DCC is in Invision menu > DCC Manager > Setup.

Note that with this, you will only be able to send to people with routers/firewalls would be able to configure their router/firewall so that they could serv if they wanted to. That means that some people who are unable to do this will not be able to connect to you.

It is much better to configure your router instead, tho reverse dcc will always work if you set it up correctly.

For your router, you can look at the router setup information at or else read through your manual, check the router manufacturer's website, or e-mail/call the router manufacturer or your ISP to see how to "Forward Ports". You will then want to forward the ports that you have set up in your port range in mIRC DCC options.